RO800
R27 300.00
The RO800 is a compact semi-industrial Reverse Osmosis water purifier. It is designed for high recovery rates and minimum energy consumption. This unit produces 2 800 litres per day, depending on inlet water flow TDS and quality. A basic water analysis will determine suitable pre-filtration. It is ideal for small water bottling plants, as well as other industrial or pharmaceutical applications. The Procon pump can easily manage a second 2540 membrane to increase product water and reduce waste water to save money.
| Weight | 38.3 kg |
|---|---|
| Dimensions | 670 × 450 × 1280 cm |
| Installation Request | DIY with instruction manual, Franchise to quote & install |
| Daily production | 800 GPD (2800 LPD) |
| Frame | Stainless Steel (Grade 304) |
| Membrane | 1 X TW2540 Membrane |
| Pre-filtration | 2 x 20” 1 micron sediment filters |
| Pressure pump | Procon Pump |
| Voltage | 220V |
| Hertz | 50/60Hz |
| Operating pressure (adj.) | 110 – 220 psi (7.6 – 15.2 bar) |
| RO Membrane pressure vessel | High pressure end prot type, 20 bar (300 PSI) |
| Flow meters | Permeate and concentrate |
| Pressure gauges | Feed water and operating pressure |
| System protection | Low pressure switch |
| Power supply | 220 – 240 VAC (50/60Hertz) Single Phase |
| Minimum inlet water feed | 20 litres per minute |
| Minimum inlet water pressure | 36 psi (2.5 bar) |
| Total hardness | < 40 mg/? |
| Free chlorine | 0 mg/? |
| TDS | < 2 000 mg/? |
| Turbidity | < 1 NTU |
| pH | 3 – 11 |
| Iron | < 0.01 mg/? |
| Silica | < 1 mg/? |
| Temperature | 5 – 40°C |
Related products
R4 270.00
R4 335.00
R1 930.00
R3 410.00
R5 635.00
R5 135.00
R10 660.01